Shop Services
Need something cut, bent, or machined? Select a service below to see the options and the details we’ll need for your job.
Braking / Bending
Form flat metal into the shape your project needs.
- Angle bends & flanges
- Bend sheet or plate to a specified angle; add edges and mounting flanges.
- Custom brackets & channels
- Form L-brackets, U-channels, covers, and other simple bent profiles.
- Repeat bends
- Make matching parts from your drawing or approved sample.
Material type and thickness, blank size, bend angles, inside bend radius, finished dimensions, and quantity.
Shearing
Straight cuts for sheet and plate blanks.
- Cut to size
- Trim material to the length and width needed for your project.
- Strips & rectangular blanks
- Prepare repeat strips, panels, and blanks for further fabrication.
- Edge trimming
- Remove excess material or square up a blank before the next operation.
Material type, thickness, finished length and width, quantity, and required dimensional tolerance.
Milling
Machine flat surfaces and features into a part.
- Facing & resizing
- Machine flat faces or bring suitable parts down to a specified thickness or size.
- Slots, pockets & keyways
- Add locating features, clearance pockets, and slots to your drawing.
- Hole patterns & tapped holes
- Locate and machine mounting holes or threaded holes.
- Part modifications
- Modify an existing bracket, plate, or component to suit a new fit.
Material, overall part size, a dimensioned drawing or sample, feature locations, tolerances, and quantity.
Ironworker Services
Punch, notch, and cut material for fabrication.
- Hole punching
- Make mounting and connection holes in suitable flat bar, plate, or angle.
- Notching
- Create corner reliefs and clearance notches for fit-up.
- Angle & flat-bar cutting
- Cut stock to the lengths needed for brackets, frames, and assemblies.
- Repeat fabrication pieces
- Prepare matching tabs, brackets, and connection pieces.
Material type and thickness, stock shape and size, cut lengths, hole or notch dimensions, spacing, and quantity.
Lathe Services
Resize, shape, and thread round parts.
- Resizing & turning
- Reduce outside diameters, add shoulders or steps, and turn a part to its finished size.
- Custom bolts & nuts
- Machine custom threaded fasteners to specified dimensions and thread details.
- Bushings, sleeves & spacers
- Make round parts with the inside diameter, outside diameter, and length your job requires.
- Shafts & pins
- Machine replacement or custom shafts and pins from a drawing or sample.
- Boring, facing & threading
- Enlarge an existing bore, finish an end face, or cut internal and external threads.
Material, outside and inside diameters, overall length, thread size and pitch, tolerances, quantity, and the intended use.
Each job is quoted individually. Material, dimensions, tooling, and machine capacity must be confirmed before work is accepted.